Scanning to a Network Folder or FTP Server

You can scan an image and save it to a network folder using your product's control panel. You can either enter the folder path directly on the product's control panel or select a folder from the Contacts list.
Note: Make sure the date and time are set correctly before using this feature.
  1. Place your original on the product for scanning.
    Note: To scan a double-sided or multi-page document, place your originals in the ADF.
  2. Press the  home button, if necessary.
  3. Select Scan. You see a screen like this:


  4. Select Network Folder/FTP. You see a screen like this:


  5. Do one of the following:
    • Select Contacts and choose an entry from the list.
    • Select Keyboard, then select the Communication Mode field and select Network Folder (SMB) or FTP. Select the Location field, enter the folder location, and select OK. Enter other information as necessary.
      Enter the folder path name for the Location setting in one of the following formats depending on the Communication Mode setting you selected:
      • SMB: \\host name\folder
      • FTP: ftp://host name/folder name
      • Select an email address from any displayed frequent contacts.
  6. Select Scan Settings.
  7. Select File Format to choose the file format for your scan.
  8. Scroll down and change the File Name if necessary.
  9. Select any additional scan settings as necessary.
  10. Select Presets to save your scan settings.
  11. Select Save. Your product scans your original and saves it in the selected location.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use