Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
Make sure there are no errors on the LCD screen and the CD/DVD tray is not inserted for printing.
Load a few sheets of plain paper in the product.
button, if necessary.
You see a screen like this:
Print Head Alignment
Select one of the following options:
if your printout is blurry.
if your printout contains horizontal banding.
Follow the on-screen instructions to print an alignment sheet.
Do not cancel printing while you are printing head alignment patterns.
Check the printed patterns on the alignment sheet and select the following on the LCD screen, depending on the alignment pattern you printed:
: For patterns 1 through 4, select the number representing the pattern with the least amount of separation or overlap.
: Select the number representing the pattern with the least amount of separation or overlap.
Adjusting Print Quality
Loading Paper in Cassette 1 (Upper Cassette)
Loading Paper in Cassette 2 (Lower Cassette)
Loading Paper in the Rear Paper Feed Slot
Cleaning the Printer Head Path
Was this page helpful?
Your California Privacy Rights