You can
enable Wi-Fi Direct mode to allow direct communication between your
product and computer or other devices without a wireless router or
access point. Make sure paper is loaded before you begin.
Note: If you
are printing from a computer, make sure you installed the network
software as described on the Start Here
sheet.
- Hold down the Wi-Fi button and press the
network status button until
the 
Wi-Fi light and 
Wi-Fi Direct light flash. Then
release both buttons. After both lights stop flashing, the
Wi-Fi Direct light remains
on. - Hold down the network status button for 10
seconds to print a network status sheet.
- Use your computer or wireless device to select the Wi-Fi network name (SSID) and password listed in the Wi-Fi Direct section of the network status sheet. You should now be able to print to your product directly from your computer or device. If you cannot print successfully, repeat the process above and make sure you enter the password exactly as written on the network status sheet.