You can often diagnose problems with your product by checking the messages on its LCD screen. You can also see help information and how-to instructions on the screen. Press the home button, if necessary, and select the help button.
|LCD screen message||Condition/solution|
|Printer error. Turn on the printer again. See your documentation for details.||A fatal error has occurred. Turn the product off and then back on again. If the error continues, check for a paper jam. If there is no paper jam, contact Epson for support.|
|Paper out in XX.||Load paper in the specified cassette.|
|Paper Setup Auto Display is set to Off. Some features may not be available. For details, see your documentation.||The Paper Setup Auto Display setting must be turned on to use AirPrint.|
|The printer's borderless printing ink pad is nearing the end of its service life. It is not a user-replaceable part. Please contact Epson support.||The ink pad is near the end of its service life and the message will be displayed until the ink pad is replaced. Contact Epson for support. (To resume printing, select Dismiss.)|
|The printer's borderless printing ink pad has reached the end of its service life. It is not a user-replaceable part. Please contact Epson support.||The ink pad is at the end of its service life. Turn off
the product and contact Epson for support.
You can still perform operations that do not use ink, such as scanning.
|To use cloud services, update the root certificate from the Epson Web Config utility.||Access your product's built-in Web Config utility and update the root certificate for your product.|
|The combination of the IP address and the subnet mask is invalid. See your documentation for more details.||There is a problem with the network connection to your product. Check the solutions in this guide.|
|Check that the printer driver is installed on the computer and that the port settings for the printer are correct.||Make sure the printer port
is selected correctly on the Port
tab of the Printer Properties screen (Windows) or the System Properties > USB list (Mac).
Select USBXXX for a USB connection or EpsonNet Print Port for a network connection.
|Check that the printer driver is installed on the computer and that the USB port settings for the printer are correct.|
|Recovery mode||An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If you still receive this error message, contact Epson for support.|