If your printouts have incorrect colors, try these
solutions:
Make sure
the paper type setting matches the paper you loaded.
Make sure
the Grayscale setting is not
selected in your printer software.
If you
selected Standard-Vivid (Windows)
or Normal-Vivid (Mac) as the
quality setting in the printer software, try selecting Standard (Windows) or Normal (Mac) instead.
Run a nozzle
check to see if any of the print head nozzles are clogged. Then
clean the print head, if necessary.
The ink
levels may be low and you may need to refill the ink. Visually
check the ink levels.
If you printed when the ink levels were too low to
be seen in the ink tank windows, refill the ink tanks to the upper
lines and run the Power Cleaning utility. Then run a nozzle check
to see if print quality has improved.
After you
print, the colors in your printout need time to set as the ink
dries. During this time, the colors may look different than you
expect. To speed up drying time, do not stack your printouts on top
of each other.
Your printed
colors can never exactly match your on-screen colors. However, you
can use a color management system to get as close as possible. Try
using the color management options in your printer software.
For best
results, use genuine Epson paper.
If you have not used the product for a long time,
run the Power Cleaning utility.
Note: Power
Cleaning consumes a lot of ink, so run this utility only if you
cannot improve print quality by cleaning the print head.