Printer error. Turn on the printer again. See your
documentation for details. |
A fatal error has occurred. Turn the product off and
then back on again. If the error continues, check for a paper jam.
If there is no paper jam, contact Epson for support. |
Paper out in XX. |
Load paper in the specified cassette. |
Paper Setup Auto Display is set to Off. Some features
may not be available. For details, see your documentation. |
The Paper Setup Auto
Display setting must be turned on to use AirPrint. |
No dial tone is detected. |
Make sure the phone cable is connected correctly and
the phone line works. If you connected the product to a PBX
(Private Branch Exchange) phone line or Terminal Adapter, change
the Line Type setting to
PBX. If you still cannot send a
fax, turn off the Dial Tone
Detection setting. (Turning off the Dial Tone Detection
setting may cause the product to drop the first digit of a fax
number.) |
The printer's borderless printing ink pad is nearing
the end of its service life. It is not a user-replaceable part.
Please contact Epson support. |
The ink pad is near the end of its service life and the
message will be displayed until the ink pad is replaced. Contact
Epson for support. (To resume printing, press the start button.) |
The printer's borderless printing ink pad has reached
the end of its service life. It is not a user-replaceable part.
Please contact Epson support. |
The ink pad is at the end of its service life. Turn off
the product and contact Epson for support.
You can still perform operations that do not use ink,
such as scanning. |
To use cloud services, update the root certificate from
the Epson Web Config utility. |
Access your product's built-in Web Config utility and
update the root certificate for your product. |
The combination of IP address and the subnet mask is
invalid. See your documentation for more details. |
There is a problem with the network connection to your
product. Check the solutions in this guide. |
Check that the printer driver is installed on the
computer and that the port settings for the printer are
correct. |
Make sure the printer port
is selected correctly on the Port
tab of the Printer Properties screen (Windows) or the System Properties > USB list (Mac).
Select USBXXX for a USB connection or EpsonNet Print Port for a network
connection. |
Check that the printer driver is installed on the
computer and that the USB port settings for the printer are
correct. |
Recovery mode |
An error has occurred during firmware updating. Connect
your product using a USB cable and try updating the firmware again.
If you still receive this error message, contact Epson for
support. |