If your
paper does not feed correctly, clean the paper path inside the
printer using the cleaning sheet that came with your product. The
cleaning sheet should only be used to clean the rear paper feed.
Caution:
Do not use tissues to clean inside the
product; lint from tissues may clog the print head
nozzles.
- Make sure there is no paper in the rear paper feed slot and the output tray is extended.
- Press the
home button, if
necessary. - Press the arrow buttons to select Maintenance and press the OK button.
- Press the down arrow button to select Paper Guide Cleaning (Rear) and press the OK button.
- Follow the on-screen instructions to clean the paper path.
- Remove the protective sheet from the cleaning sheet.
- Load the cleaning sheet into the rear paper feed slot and slide the edge guides against the sheet. Make sure you insert the cleaning sheet with the cut corner at the lower right as shown.
- Press the
start button to feed the cleaning
sheet through the product.
- Check the cleaning sheet when it comes out of the product. You can repeat the previous steps up to three times as necessary (the cleaning sheet loses its effectiveness when used three times or more).
