Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n wireless module in the projector. Do not install any other type of wireless module.
Caution:
Never remove the module while its indicator light is blue or flashing, or while you are projecting wirelessly. You may damage the module or lose data.
Note: The wireless LAN module is not included with your projector.
  1. Turn off the projector and unplug the power cord.
  2. Unscrew and remove the cable cover if it is attached (screwdriver not included).


  3. Insert the wireless LAN module into the port shown here.


  4. Replace the cable cover and tighten the screws.
  5. Plug in and turn on the projector.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use