To set up
your projector for monitoring and control using a Crestron RoomView
system, make sure your computer and projector are connected to the
network. If you are connecting wirelessly, set up
the projector using the Advanced network connection mode.
Note: If you
want to use the Crestron RoomView system when the projector is
turned off, you need to adjust the Standby Mode setting in the ECO
menu.
- Press the Menu button.
- Select the Network menu and press Enter.
- Select Network Configuration and press Enter.
- Select the Others menu and press Enter.
- Set the Crestron RoomView setting to
On to allow the projector to be
detected.
Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson Projector Management software.
- When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
- Turn off the projector, then turn it on again to enable the setting.
