If the pen position is not the same as the mouse
pointer, try the following solutions:
- Reset the keystone, Quick
Corner, and Arc Correction
settings to their factory defaults.
- If you mounted the projector using a wall mount and
used keystone or other digital correction settings to adjust the
image, return the settings to their factory defaults. Instead, use
the adjustment dials on the wall mount to adjust the image shape;
do not use any digital correction. Then focus the image and
recalibrate.
- If you use
the E-Zoom + button on the remote
control to enlarge the image, the pen position is not accurate.
When you return the image to the original size, the position should
be correct.
- Select Reset All Config from the Reset menu
to restore the projector settings to their default values.
- If you connected your projector through a video
scaler, make sure the video scaler output resolution setting
matches your projector's native resolution.
- Try adjusting the image shape using the adjustment
dials on the projector mount, if you are using one.
- Focus the image to sharpen it.
- Make sure
you have calibrated the system. Try manual calibration.
- Make sure
the cable cover is in place to keep cables from blocking the
signal.
- Try
adjusting the pen operation area.
- In PC
Interactive mode (in the Extended menu), turn off the Auto Adjust Pen Area setting and select the
Manual Adj. Pen Area
setting.