If the projected image is not evenly rectangular,
try the following solutions:
- If the
projector is not mounted on the wall or ceiling, place it directly
in front of the center of the screen, facing it squarely, if
possible.
- Use the
Image Shift setting to adjust the
image position, rather than moving the projector.
- Press the keystone buttons on the projector to
adjust the image shape.
- Adjust the image shape using the Geometry Correction menu settings.
Note:
Adjusting Quick Corner,
H/V-Keystone, and Arc Correction settings may affect focus and
pen calibration.
Note: If the
projector is mounted on the wall, always use the adjustment dials
on the mount to center the image.