| Margin Setting
|
Side
Margin(Right)
|
Sets the width of the
right or left margin from 0.12 to 1.00 inch (3 to 25 mm). |
| Side
Margin(Left)
|
| Print Start
Position
|
0.00 to 32.00 inches (0 to 800 mm) |
Sets an additional margin on the right side of
the media. |
| Margin Between
Pages
|
Normal
No Margin
|
Sets a margin between pages. |
| Media Check
|
Media Size Check
|
Automatically detects the edges of the media.
Select On unless the printer
displays Media Size Error when media
is loaded correctly. If you select Off, the printer may print beyond the edges of
the media.
Changes to the settings are applied after the media is
reloaded. |
| Media End Check
|
Automatically detects the end of the media.
Select On unless the printer
displays Media Out when media is
loaded correctly. |
| Media Skew Check
|
Stops printing and displays an error when
skewed media is detected. Select On
to avoid jams caused by skewed media. |
| Media End Option
|
Continue
Stop Printing
|
Selects whether to continue an unfinished print
job after a media roll is replaced. |
| Btw Pages Nozzle
Check
|
Off
Print Pattern (1 to 10 pages)
|
Selects how often to print an automatic nozzle
check pattern between printed pages. |
| Lamp Setting
|
Auto
Manual
|
Selects if the light inside the front cover
turns on automatically. If you select Manual, press the  internal light button on the
control panel to turn the light on or off. |
| Head Mode
|
2 Heads Mode
Head1
Head2
|
Select 2 Heads
Mode in most situations.
If there is a clogged nozzle in a single print head that cannot
be cleared after several head cleanings, you can continue printing
by selecting one of the unclogged heads. |
| Sleep Mode
|
15 to 240 minutes |
Sets the number of minutes of inactivity before
the product enters sleep mode. Press any button on the control
panel to resume operation. |
| Charge Settings
|
Extend Charge
Timing
Forced Charge
|
Adjusts the chip unit if there is a discrepancy
between the estimated ink level indicator on the LCD screen and the
actual amount of remaining ink. |
| Cleaning During
Standby
|
When to Clean
Cleaning Level
|
Sets the time (1 to 240 hours) to perform head
cleaning and the strength level of cleaning when the product has
not been in use. |
| Head Maint.
Interval
|
20 to 400 m |
Sets when to perform head maintenance after the
selected length of media has been printed. |
| Restore Settings
|
Yes
No
|
Returns all items in the Printer Setup menu to
their default settings. |