You can
select optional network settings on the Others menu.
Press the Menu
button.
Select the Network menu
and press Enter.
Select Network
Configuration and press Enter.
Select the Others menu
and press Enter.
If you want to use the
Secure HTTP protocol to encrypt communication when using Web
Control, turn on the Secure HTTP
setting and import the web server certificate using the
Web Server Cert. setting.
If available, select the Priority Gateway setting for your
network.
If your network environment uses an AMX controller, turn
on the AMX Device Discovery
setting to allow the projector to be detected.
If your network environment uses a Crestron RoomView
controller, turn on the Crestron
RoomView setting to allow the projector to be
detected.
Note:
Enabling Crestron RoomView disables the Epson Message Broadcast
feature in the EasyMP Monitor software.
If your network environment uses a Control4 or Control4
SDDP controller, turn on the Control4
SDDP setting to allow the projector to be
detected.
If you want to control the projector using Art-Net (an
Ethernet communication protocol based on TCP/IP), turn on the
Art-Net setting.
If you want this projector to receive broadcasted messages
over the network, turn on the Message
Broadcasting setting. Administrators can
broadcast messages over the network using the Epson Projector
Management software (Windows only).
When you finish selecting settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.