you have your replacement ink packs handy before you begin. You
must install new ink packs immediately after removing the old
If an ink pack is low or expended, you see a message on
your product's LCD screen and on your computer screen. Note which
ink packs need to be replaced.
Unlock and open the front cover.
Press the ink pack tray until it clicks and pull it
Remove the used ink pack from the tray.
of used ink packs carefully. Do not take the used ink pack apart or
try to refill it.
ink gets on your skin, wash it thoroughly with soap and water. If
ink gets into your eyes, flush them immediately with water. Seek
medical advice if problems persist. If ink gets into your mouth,
spit it out and see a doctor right away. Keep ink packs out of the
reach of children.
Shake the new ink pack 10 times and remove it from the
Do not touch the green chip on the ink
Insert the new ink pack
into the ink pack tray as shown. Make sure the top of the ink pack
is level with the top of the tray.
Slide the ink pack tray into the product until it
Note: If you
cannot insert the tray all the way, make sure you are inserting the
correct color ink pack and that the top of the ink pack is level
with the top of the tray. The ink packs can only be inserted into
the proper location.
Repeat these steps for
each ink pack you want to install.
When you are finished, close and lock the front
Follow the on-screen
instructions to charge your product's ink.