If you have
a WPS-enabled wireless router or access point, you can use Wi-Fi
Protected Setup (WPS) to connect your product to the network.
Press the home button, if
Select Wi-Fi. You
see a screen like this:
Select Start Setup or Change Settings.
Select Push Button Setup
Follow the instructions on the LCD screen to complete WPS
Press the home button to exit. You
see the icon on the LCD screen and should
be able to connect to your product directly from your computer or
device, and then print. If you are printing from a computer, make
sure you installed the network software as described on the
Start Here sheet.
Note: If you
don't see the icon, repeat these steps to try