If you have
a WPS-enabled wireless router or access point, you can use Wi-Fi
Protected Setup (WPS) to connect your product to the network.
Press the home button, if
necessary.
Select the icon. You see a screen
like this:
Select Wi-Fi
(Recommended).
Select Start Setup or Change Settings.
Select Push Button Setup
(WPS).
Follow the instructions on the LCD screen to complete WPS
setup.
Note: Make
sure you press Start Setup within
two minutes of activating WPS on your router.
Press the home button to return to the
Home screen. The Wi-Fi icon displayed on the LCD
screen indicates your wireless connection status. If the product is
not connected to the network, repeat these steps to try again.
If you are printing from a computer, make sure you
installed the network software as described on the Start Here sheet.