Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.
  1. Press the  home button, if necessary.
  2. Select the icon. You see a screen like this:

  3. Select Wi-Fi Direct.
  4. Select Start Setup.
  5. Select Start Setup again. You see a screen like this:

  6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
  7. When you are finished, scroll down on the product's LCD screen and select OK.
    Note: You can also scan the QR Code on the LCD screen to view online setup instructions.
  8. Press the  home button to return to the Home screen. The Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product.

    If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use