Scanning to a Connected Computer

You can scan an original and save it to a connected computer using your product's control panel. The computer must be connected using a USB cable or connected to the same network as your product.

You can save the scanned file as a JPEG or PDF file, or attach it to an email. You can also set up custom scan settings using Event Manager and automatically scan using those settings on your product control panel.

Note: Be sure you have installed Epson Scan 2 and Event Manager on your computer before scanning to your computer.
  1. Place your original on the product for scanning.
  2. Press the  home button, if necessary.
  3. Select Scan. You see a screen like this:


  4. Select Computer. You see a screen like this:


    Note: Select OK to close the information screen, if necessary.
  5. Select Select a computer and choose one of the following options:
    • If your computer is connected to your product over a network, select a connected computer from the displayed list. (If the computer is not listed, select Search Again.)
    • If you computer is connected to your product using a USB cable, select USB Connection.
  6. Select Save as PDF and choose one of the following options:
    • Save as JPEG to save the scanned image as a JPEG file.
    • Save as PDF to save the scanned document or image as a PDF file.
    • Attach to email to open the default email software on your computer and save the scanned document or images as a JPEG email attachment.
    • Follow custom setting to save the scanned document or image using custom settings you have selected using the Event Manager custom scan settings option.
    Note: You can customize the settings for each of the options above using Event Manager.
  7. Select Save to start scanning. Your product scans your original and saves the scanned file to your computer.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use