Loading Paper in the Cassette
You can load paper up to this size in the paper cassette:
Legal (8.5 × 14 inches [216 × 356 mm])
Before loading paper, make sure your product is not currently printing, scanning, or copying.
Open the front cover.
Pull out the paper cassette until it stops.
Squeeze the tab on the right edge guide and slide the edge guides outward.
Do one of the following:
Insert paper into the cassette with the glossy or printable side facedown and slide it in until it stops.
Make sure the paper is loaded against the rear of the cassette.
For legal-size paper, extend the legal paper guide and load paper using the guide line as shown.
Insert up to 10 envelopes with the printable side facedown and flap edge right, as shown.
Slide the edge guides against the paper, but not too tightly.
Make sure the paper fits under the tabs on the edge guides.
Slide the cassette back into the product until it stops.
Select the size and type of the paper you loaded on the product LCD screen and select
Extend the output tray.
Do not remove or insert the paper cassette during printing.
Always follow these paper loading guidelines:
Load only the recommended number of sheets.
Load paper short edge first and printable side facedown.
Make sure the paper is under the tabs on the edge guides and not sticking out from the rear end of the cassette.
If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
If print quality declines when printing multiple envelopes, try loading one envelope at a time.
Load letterhead or pre-printed paper top edge first.
Check the paper package for any additional loading instructions.
Paper Loading Capacity
Printable Area Specifications
Was this page helpful?
Your California Privacy Rights