Printer error. Turn on the printer again. See your
documentation for more details. |
Turn the product off and then back on again. If the
error persists, check for and remove any jammed paper or protective
materials from the product. If the error still persists, contact
Epson for support.
If you see any of the following error codes, make sure
you have not exceeded the loading capacity for any paper
source:
- 000181
- 000184
- 000201
- 000204
- 000221
- 000224
|
Printer error. Contact Epson Support. Non-printing
features are available. |
The product may be damaged, but non-printing features
are still available. Contact Epson for support. |
Paper out in XX. |
Load the size and type of paper in the paper source
indicated. |
Too many paper cassette units are installed. Turn the
power off and uninstall the extra units. See your documentation for
details. |
You can install up to three optional paper cassette
units. Remove any extra units. |
Unsupported Paper Cassette Units have been installed.
Turn the power off and uninstall. For details, see your
documentation. |
Unsupported optional paper cassette units are
installed. Remove the unsupported units. |
Cannot print because XX is out of order. You can print
from another cassette. |
Turn the product off and then back on again. Reinsert
the indicated paper cassette. If the error persists, contact Epson
for support. |
Maintenance Roller in XX is nearing the end of its
service life. |
The maintenance rollers need to be replaced
periodically for optimal performance. (Paper may not feed correctly
from the paper cassette or rear paper feed when a maintenance
roller is near the end of its service life.) |
Maintenance Roller in XX is at the end of its service
life. Replace it and reset the maintenance roller counter. |
Replace the maintenance rollers and reset the
maintenance roller counter for the paper cassette for which you
replaced the maintenance rollers. |
Maintenance roller in the Rear Paper Feed is at the end
of its service life. For details, see your documentation. |
Contact Epson for support. |
You need to replace Ink Cartridge(s). |
Replace the indicated ink cartridges. |
The time for maintenance is approaching. Contact Epson
Support. |
Do not attempt to perform maintenance on your own.
Contact Epson for support. |
Maintenance required. Contact Epson Support. |
Do not attempt to perform maintenance on your own.
Contact Epson for support. |
Paper Setup Auto Display is set to Off. Some features
may not be available. For details, see your documentation. |
AirPrint is not available when the Paper Setup Auto Display setting is disabled.
Set the Paper Setup Auto Display
setting to On. |
The combination of the IP address and the subnet mask
is invalid. See your documentation for more details. |
There is a problem with the network connection to your
product. Set up your product on the network again. |
To use cloud services, update the root certificate from
the Epson Web Config utility. |
Access the Web Config utility and update the cloud
service root certificate. |
Check that the printer driver is installed on the
computer and that the port settings for the printer are
correct. |
Make sure the printer
port is correctly configured. In Windows, make sure the port is set
to a USBXXX setting for a USB
connection or EpsonNet Print Port
for a network connection. |
Check that the printer driver is installed on the
computer and that the USB port settings for the printer are
correct. |
Recovery mode |
An error has occurred during firmware updating. Connect
your product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help, contact
Epson for support. |