Using WPS to Connect to a Network

If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.
  1. Press the  home button, if necessary.
  2. Press the icon. You see a screen like this:


  3. Select Router.
  4. Select Push Button Setup (WPS).
  5. Follow the instructions on the LCD screen to complete WPS setup.
  6. Press the  home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.
    Note: If you don't see the icon, repeat these steps to try again.