If your product does not appear in the Mac printer window, try
these solutions:
- Turn your
product off, wait 30 seconds, then turn it back on again.
- If you are
connecting the product via Wi-Fi Protected Setup (WPS) and the
Wi-Fi icon on your product's LCD screen is not lit, make sure you
select one of the WPS options from the product control panel within
2 minutes of pressing the WPS button on your router.
- If you are
connecting the product wirelessly via EpsonNet Setup and you do not
see the Wi-Fi antenna icon with connection bars on your LCD screen,
make sure your product software was installed correctly. If
necessary, reinstall your software.
Note: If you are
using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single
network name (SSID) for both the 2.4 GHz and 5 GHz band,
give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router
documentation or contact your internet service provider for
instructions.