Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
  • Make sure the Scale setting in the Extended menu is turned off.
  • Select a different image aspect ratio in the Signal menu.
  • Check the cables connecting the computer or video source to the projector. Try connecting different cables.
  • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
  • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
  • Make sure you selected the correct Projection setting.
  • If you are passing the video signal through another device, make sure the device is set up correctly, then try connecting the video source directly to the projector.
  • Make sure the Light Source Calibration options in the Reset menu are set correctly.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use