you have your replacement ink pack handy before you begin. You must
install a new ink pack immediately after removing the old
If the ink pack is low or expended, you see a message on
your product's LCD screen and on your computer screen.
Unlock and open the front cover.
Press the ink pack tray until it clicks and pull it
Remove the used ink pack from the tray.
of used ink packs carefully. Do not take the used ink pack apart or
try to refill it.
ink gets on your skin, wash it thoroughly with soap and water. If
ink gets into your eyes, flush them immediately with water. Seek
medical advice if problems persist. If ink gets into your mouth,
spit it out and see a doctor right away. Keep ink packs out of the
reach of children.
Shake the new ink pack 10 times and remove it from the
Do not touch the green chip on the ink
Insert the new ink pack
into the ink pack tray as shown. Place the ink pack into the ink
pack tray and move the handle forward to make sure the ink pack
Make sure the top of the
ink pack is level with the top of the tray and move the handle back
to its original position.
Slide the ink pack tray into the product until it
Note: If you
cannot insert the tray all the way, make sure the top of the ink
pack is level with the top of the tray.
When you are finished, close and lock the front
Follow the on-screen
instructions to charge your product's ink.