You can load
paper up to this size in the paper cassette: Legal
(8.5 × 14 inches [216 × 356 mm])
Note: If the
optional paper cassette unit is installed, do not remove more than
one cassette at a time.
- Make sure the product is not operating and pull out the paper cassette.
- Slide the front edge guide outward all the way, then slide the side edge guides to the paper size you are using.
- Load paper with the printable side facedown and slide the
front edge guide against the paper.
Note: Make sure the paper fits beneath the arrow mark inside the edge guides.
- Insert the paper cassette all the way into the product.
- Do one of the
following:
- Select the size and type of paper you loaded on the LCD screen.
- Press the
Paper
Setting button and select the paper source, then
select the size and type of paper you loaded. - Select the size and type of paper you loaded in the Settings > General Settings > Printer Settings > Paper Source Settings > Paper Setup menu.
Always follow
these paper loading guidelines:
- Load only the recommended number of sheets.
- Load paper short edge first, no matter which way your document faces.
- Load the printable side facedown.
- Load letterhead or pre-printed paper top edge first.
- Do not load paper above the line underneath the arrow mark inside the edge guides.
- Check the paper package for any additional loading instructions.