Network Interface Specifications


Standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on purchase location
Security WPA2-PSK (AES); complies with WPA2 standards with support for WPA/WPA2 Personal

WPA2-Enterprise (AES)

WEP (64/128 bit)

Note: Wi-Fi Direct mode supports only WPA2-PSK (AES) security.
Frequency band 2.4 GHz
Maximum radio-frequency power transmitted 20 dBm (EIRP)
Communication mode Infrastructure mode

Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b

Note: Wi-Fi Direct Simple AP mode available even if you connect the product to an Ethernet network.


Standard IEEE802.3i (10BASE-T)*

IEEE802.3u (100BASE-TX)

IEEE802.3ab (1000BASE-T)*

IEEE802.3az (Energy Efficient Ethernet); the connected device should be IEEE802.3az compliant

Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps Half duplex
Connector RJ-45

* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.

Security Protocol

IEEE802.1X; requires the connected device to comply with IEEE802.1X

IPsec/IP Filtering

SSL/TLS; either HTTPS Server/Client or IPPS



Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use