Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.
If you turned on the
Auto Source Search
setting in the Extended menu, the projector automatically switches to another detected image source if the signal to the current image source is lost.
Make sure the connected image source you want to use is turned on.
For video image sources, insert a DVD or other video media and press its play button, if necessary.
Do one of the following:
button on the projector or remote control until you see the image from the source you want.
Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
Computer port (1 or 2) source
HDMI (1, 2, or HDBaseT*) or Video source
USB port (external devices) source
LAN (Ethernet, Screen Mirroring*) source
*select projector models only
button on the remote control and select your image source.
Using Basic Projector Features
Projector Setup Settings - Extended Menu
Was this page helpful?
Your California Privacy Rights