You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note:
Available information depends on the current input source.
| Setting | Options | Description |
|---|---|---|
| Projector Info | Operation Hours | Displays the number of hours the projector has been used since it was turned on |
| Source | Displays the name of the port to which the current input source is connected | |
| Input Signal | Displays the input signal setting of the current input source | |
| Resolution | Displays the resolution of the current input source | |
| Refresh Rate | Displays the refresh rate of the current input source | |
| Sync Info | Displays information that may be needed by a service technician | |
| Status | Displays information about projector problems that may be needed by a service technician | |
| Serial Number | Displays the projector's serial number | |
| Event ID | Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes | |
| HDBaseT Signal Level
(PowerLite L510U/L610U/L610W/L615U) |
Displays the image signal information from the HDBaseT port | |
| Light Source Info | Light Source Hours | Displays the number of hours (H) the light source has been used in various modes |
| Version | Main
Screen Mirroring (PowerLite L610U/L615U) |
Displays the projector's firmware information |
| Status Information | — | Displays basic status information |