Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports.

If you are projecting video using a Computer port, connect the projector to the video source using an optional stereo mini-jack audio cable or an RCA audio cable.

Note: If you connected your video source to the projector using an HDMI cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound.
  1. Connect the audio cable to your video source's audio-out ports.
  2. Connect the other end of the cable to the projector's Audio port that corresponds to the Computer port you are using for video.


Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use