If only a partial computer image appears, try the
following solutions:
- For VGA connections, press the Auto button on the remote control to optimize
the image signal.
- Make sure
you selected the correct Screen
Type setting for the screen you are using.
- Make sure
the Scale setting in the Extended
menu is turned off.
- Make sure the Resolution setting in the Signal menu is set
correctly for the input signal.
- Try
adjusting the image position using the Screen Position menu setting.
- Press the
Aspect button on the remote
control to select a different image aspect ratio.
- If you
zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a
full display.
- Check the
cables connecting the computer or video source to the projector.
Try connecting different cables.
- Check your
computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual
for details.)
- Check the
resolution assigned to your presentation files to see if they are
created for a different resolution than you are projecting in. (See
your software help for details.)
- Make sure you selected the correct Projection setting.