Name | Description |
---|---|
Bonjour | Bonjour is used to search for devices and AirPrint |
SLP | SLP is used for push-scanning and network searching in EpsonNet Config |
WSD | Add WSD devices, or print and scan from the WSD port |
LLTD | Displays the product on the Windows network map |
LLMNR | Use name resolution without NetBIOS even if you cannot use DNS |
LPR | Print from to the LPR port |
RAW(Port9100) | Print from the RAW port (Port 9100) |
IPP | Print over the Internet, including AirPrint |
FTP | Print over FTP |
SNMPv1/v2c | Remotely set up and monitor your product |
SNMPv3 | Remotely set up and monitor your product with the SNMPv3 protocol |
Setting | Options/Description |
---|---|
Use Bonjour | Search for or use devices through Bonjour (you cannot use AirPrint if disabled) |
Bonjour Name | Displays the Bonjour name |
Bonjour Service Name | Displays the Bonjour service name |
Location | Displays the Bonjour location name |
Top Priority Protocol | Selects the protocol that is the top priority for Bonjour printing |
Wide-Area Bonjour | Enables the Wide-Area Bonjour protocol; register all products on the DNS server to locate them over the segment |
Setting | Options/Description |
---|---|
Enable WSD | Enable adding devices using WSD, and printing and scanning from the WSD port |
Printing Timeout (sec) | Enter the communication timeout value for WSD printing between 3 and 3,600 seconds |
Scanning Timeout (sec) | Enter the communication timeout value for WSD scanning between 3 and 3,600 seconds |
Device Name | Displays the WSD device name |
Location | Displays the WSD location name |
Setting | Options/Description |
---|---|
Enable IPP | Enable IPP communication for products that support IPP are displayed (you cannot use AirPrint if disabled) |
Allow Non-secure Communication | Allow the printer to communicate without any security measures (IPP) |
Communication Timeout (sec) | Enter the timeout value for IPP printing between 0 and 3,600 seconds |
URL(Network) | Displays IPP URLs (http and https) when the product is connected using wired LAN or Wi-Fi (the URL is a combined value of the product’s IP address, Port number, and IPP printer name) |
URL(Wi-Fi Direct) | Displays IPP URLs (http and https) when the product is connected using Wi-Fi Direct (the URL is a combined value of the product’s IP address, Port number, and IPP printer name) |
Printer Name | Displays the IPP printer name |
Location | Displays the IPP location |
Setting | Options/Description |
---|---|
Enable SNMPv1/v2c | Enable SNMPv1/v2c for products that support SNMPv3 |
Access Authority | Set the access authority when SNMPv1/v2c is enabled to Read Only or Read/Write |
Community Name (Read Only) | Enter 0 to 32 ASCII characters |
Community Name (Read/Write) | Enter 0 to 32 ASCII characters |
Setting | Options/Description |
---|---|
Enable SNMPv3 | Enable SNMPv3 for products that support SNMPv3 |
User Name | Enter 1 to 32 characters |
Authentication Settings | Select an algorithm and set a password for authentication |
Encryption Settings | Select an algorithm and set a password for encryption |
Context Name | Enter 1 to 32 characters |