Before
turning off the projector, shut down any computer connected to it
so you can see the computer display during shutdown.
Note: Turn
off this product when not in use to prolong the life of the
projector. Lamp life will vary depending upon mode selected,
environmental conditions, and usage. Brightness decreases over
time.
Note: When
using the Blank feature, the projector lamp
is still on. To turn off the lamp, turn off the projector.
Note: If the
Standby Confirmation setting is
set to Off on the Settings menu, the projector shuts down
immediately when you press the power button on the projector or the
Standby button on the remote
control.
-
Press the power button on the
projector or the Standby button
on the remote control.
The projector displays a shutdown confirmation screen. -
Press the power button on the projector or the
Standby button on the remote
control again. (To leave it on, press any other button.)
The lamp turns off and the lens shutter closes.
The projector's Status light
flashes and then turns off.
Note: If you unplug the projector before the Status light stops flashing and need to turn the projector back on, wait until the lamp has cooled down (about 10 minutes), plug the power cord back in, and turn the projector on again. You cannot operate the projector until it finishes cooling down.
-
To transport or store the projector, make sure
the Status light is off, then unplug the
power cord.
Caution:To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing.
