Settings on the Extended menu let you customize various projector setup features that control its operation.
| Setting | Options | Description |
|---|---|---|
| Home Screen | Home Screen Auto
Disp.
Custom Function 1 Custom Function 2 |
Adjust settings on the Home Screen
Home Screen Auto Disp.: controls whether the Home screen displays automatically when the projector is turned on Custom Function 1 / Custom Function 2: let you customize the options displayed on the Home screen and save your settings as a preset |
| Display | — | See the Display settings table in this topic |
| Projection | Front
Front/Ceiling Rear Rear/Ceiling |
Selects the way the projector faces the screen so the image is oriented correctly |
| Operation | — | See the Operation settings table in this topic |
| Standby Mode | Communication Off
Communication On |
Indicates whether the projector can be monitored over a network while in standby mode |
| Language | Various languages available | Selects the language for projector menu and message displays (not changed by Reset option) |
Display settings
| Setting | Description |
|---|---|
| Menu Position | Selects the position of the projector menu displayed on the screen |
| Messages | Controls whether messages are displayed on the screen |
| Display Background | Selects the screen color or logo to display when no signal is received |
| Startup Screen | Controls whether a special screen appears when the projector starts up |
| Standby Confirmation | Displays a confirmation message after pressing the Standby button on the remote control |
| Panel Alignment | Corrects color misalignment in the projected image |
| Color Uniformity | Adjusts the color tone balance |
Operation settings
| Setting | Description |
|---|---|
| Direct Power On | Turns on the projector when you plug it in |
| Sleep Mode | Automatically places the projector in standby mode after an interval of inactivity |
| Sleep Mode Timer | Sets the time before the projector automatically turns off (Sleep Mode must be turned on) |
| Illumination | Turns off the status indicator lights on the projector |
| Trigger Out | Outputs a DC 12V signal at 200 mA maximum from the 3.5
mm mini-jack Trigger Out port
whenever the projector is turned on.
If you select Anamorphic Wide as the Trigger Out setting, voltage is only output from the Trigger Out port when the Aspect setting is set to Anamorphic Wide or Horiz. Squeeze (Pro Cinema 6050UB). |
| High Altitude Mode | Regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) |
Note: The
Reset setting does not reset the
Memory, Projection, High
Altitude Mode, Standby
Mode or Language
settings.