Charging the Battery (ES-60W/ES-65WR)

The scanner runs on battery power when it is not connected to the computer with a USB cable, or if it is connected via Wi-Fi. You can charge the battery from a computer with a USB connection to the scanner.
  1. Make sure that the computer is turned on and not in sleep mode.
  2. Connect the scanner to the computer using the micro USB cable that came with the scanner.


  3. Slide the  power switch to turn on the scanner. The  battery light flashes and shows the battery level while the battery is charging. When charging is complete, the battery level is shown as full. If the scanner is off when charging completes, the battery light turns off.
    Note: The battery takes about 3.5 hours to fully charge. Charging times increase if the scanner is on during the charging process.