When you finish printing on roll paper, you
should remove it from the printer to avoid indenting or creasing
the lead edge of the paper.
- Open the
cut sheet cover.
- Release the central lock and open the
roll paper cover.
- Select Remove on the LCD screen. The roll paper rewinds
and ejects automatically.
Note: Make sure
the roll paper is rewound completely before removing it from the
printer.
- Hold both ends of the spindle and lift
it up from the spindle holder.
- Remove the transparent paper stop from
the spindle.
- Remove the spindle from the roll
paper.
- Place the roll paper in its original
package.
Note: Store roll
paper on its end or horizontally (if the packaging end-caps are
installed). Never store roll paper on its edge, as a flat spot can
develop and lead to imaging artifacts on the prints. Do not store
roll paper in dusty areas. Print head maintenance and cleanings
increase if dust accumulates on the paper.
- Reattach the transparent paper stop to
the spindle.
- Place the spindle back into the
printer.
- Close the roll paper cover and the cut
sheet cover.
Note: To prevent
dust from accumulating inside the printer, always keep the roll
paper cover and cut sheet cover closed unless you are loading or
unloading media.