Art-Net Channel Definitions

Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the projector by using a DMX controller or an application system.

The following table lists the channel definitions used to control the projector in Art-Net.

Begin by setting channel 13 to Can control.
Note: When controlling the projector using Art-Net and performing operations from the remote control or control panel, settings made by the DMX controller or application software may not be applied to the projector correctly or may differ from the projector's actual status. If you want to apply control for multiple channels to the projector, set Channel 13 to Cannot control before you make any other settings. Then set Channel 13 to Can control after setting multiple channels. You can then control the projector without changing the setting for Channel 13.
Channel/Function Operation Parameters Description
1 Adjusting light (dimming) 0% to 100% 0 to 255 Adjusts the image brightness (default is 0)
2 Shutter control Shutter closed

Non-operational

Shutter open

0 to 63

64 to 191

192 to 255

Closes and opens the shutter (default is 128)
3 Switch source Non-operational 0 to 23, 32 to 47, 64 to 71, 88 to 127, 144 to 167, 184 to 255 Switches to the specified source (default is 0)
HDBaseT 24 to 31
SDI 48 to 55
Computer 56 to 63
BNC 72 to 79
LAN 80 to 87
Slot 1-1* 128 to 135
Slot 1-2* 136 to 143
Slot 2-1* 168 to 175
Slot 2-2* 176 to 183
4 Lens position Non operational

Move to home position

0 to 31, 64 to 255

32 to 63

Shifts the lens to the home position (default is 0)
5 Horizontal lens shift (+) Lens adjustment Movement - large: 0 to 31

Movement - medium: 32 to 63

Movement - small: 64 to 95

Shifts the lens horizontally by the amount of shift specified (default is 128)
Non-operational 96 to 159
(–) Lens adjustment Movement - small: 160 to 191

Movement - medium: 192 to 223

Movement - large: 224 to 255

6 Vertical lens shift (+) Lens adjustment Movement - large: 0 to 31

Movement - medium: 32 to 63

Movement - small: 64 to 95

Shifts the lens vertically by the amount of shift specified (default is 128)
Non-operational 96 to 159
(–) Lens adjustment Movement - small: 160 to 191

Movement - medium: 192 to 223

Movement - large: 224 to 255

7 Electronic zoom (+) Lens adjustment Movement - large: 0 to 31

Movement - medium: 32 to 63

Movement - small: 64 to 95

Zooms using the specified amount of movement (default is 128)
Non-operational 96 to 159
(–) Lens adjustment Movement - small: 160 to 191

Movement - medium: 192 to 223

Movement - large: 224 to 255

8 Electronic focus (+) Lens adjustment Movement - large: 0 to 31

Movement - medium: 32 to 63

Movement - small: 64 to 95

Performs electronic focus using the specified amount of movement (default is 128)
Non-operational 96 to 159
(–) Lens adjustment Movement - small: 160 to 191

Movement - medium: 192 to 223

Movement - large: 224 to 255

9 Electronic distortion (+) Lens adjustment Movement - large: 0 to 31

Movement - medium: 32 to 63

Movement - small: 64 to 95

Corrects distortion using the specified amount of movement (default is 128)
Non-operational 96 to 159
(–) Lens adjustment Movement - small: 160 to 191

Movement - medium: 192 to 223

Movement - large: 224 to 255

10 Load lens memory Non-operational 0 to 15, 176 to 255 Loads the specified lens memory (default is 0)
Load lens memory 1 16 to 31
Load lens memory 2 32 to 47
Load lens memory 3 48 to 63
Load lens memory 4 64 to 79
Load lens memory 5 80 to 95
Load lens memory 6 96 to 111
Load lens memory 7 112 to 127
Load lens memory 8 128 to 143
Load lens memory 9 144 to 159
Load lens memory 10 160 to 175
11 Power control Power off

Non-operational

Power on

0 to 63

64 to 191

192 to 255

Turns the projector power on or off (default is 128)
12 Geometry correction Off 0 to 15 Performs geometry correction (default is 255)
H/V-Keystone 16 to 31
Quick Corner 32 to 47
Point Correction 48 to 63
Curved Surface 64 to 79
Corner Wall 80 to 95
Load geometry correction memory 1 96 to 111 Loads a geometry correction memory (default is 255)
Load geometry correction memory 2 112 to 127
Load geometry correction memory 3 128 to 143
Non-operational 144 to 175
13 Lock Cannot control

Can control

0 to 127

128 to 255

Enables/disables Art-Net operations (default is 0)
14 Freeze Non-operational 0 to 31, 96 to 159, 224 to 255 Pauses or resumes image display (default is 128)
Freeze off 32 to 95
Freeze on 160 to 223

* The slot number of the interface board followed by the port number from left to right on the interface board

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use