Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.

  1. Turn on the projector and display an image.
  2. Press the Geometry button on the projector control panel or remote control.
  3. Select Quick Corner and press Enter. You see the Quick Corner adjustment screen:

    Note: You can also access the Quick Corner setting by pressing the Menu button and selecting Geometry Correction on the Settings menu.
  4. Use the arrow buttons on the projector or remote control to select the corner of the image you want to adjust. Then press Enter.
  5. Press the arrow buttons to adjust the image shape as necessary.
    Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen. Then select Yes and press Enter.
  6. When you are finished, press the Menu button.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use