Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.
  1. Make sure the connected image source you want to use is turned on.
  2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
  3. Do one of the following:
    • Press the Search button on the remote control until you see the image from the source you want.


    • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
      1 HDBaseT port source
      2 HDMI source
      3 Computer or BNC port source
      4 DisplayPort source (if optional DisplayPort interface board is installed)
      5 SDI port source
      6 Network source
      7 Input ports on the interface board in Slot 2
      8 Input ports on the interface board in Slot 1
      9 DVI-D source
    • Press the button for the source you want on the projector control panel. If there is more than one port for that source, press the button again to cycle through the sources.


      1 HDMI or DVI-D source
      2 HDBaseT port or network source
      3 SDI port source
      4 Computer or BNC port source
      5 Input ports on the interface board in Slot 1
      6 Input ports on the interface board in Slot 2

      The Sync. light on the control panel turns on for the currently selected input source.

Parent topic: Using Basic Projector Features
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use