Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
  1. Press the Standby button on the projector or remote control.
    The projector displays a shutdown confirmation screen.

  2. Press the Standby button on the projector or remote control again. (To leave it on, press any other button.) The projector beeps twice, the laser turns off, and the Status light turns off.
    Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
  3. Turn off the power using the power switch on the side of the projector. The On/Standby light turns off.
  4. To transport or store the projector, make sure the Status light is off, then unplug the power cord. (If necessary, flip open the power cable holder first.)

Note: If you use the projector continuously for more than 24 hours, or regularly turn it off by shutting off the power outlet, schedule periodic Light Source Calibration events in the Extended menu schedule settings.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use