Art-Net Channel Definitions

Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the projector by using a DMX controller or an application system.

The following table lists the channel definitions used to control the projector in Art-Net.

Begin by setting channel 13 to Can control.

Note: When controlling the projector using Art-Net and performing operations from the remote control or control panel, settings made by the DMX controller or application software may not be applied to the projector correctly or may differ from the projector's actual status. If you want to apply control for multiple channels to the projector, set Channel 13 to Cannot control before you make any other settings. Then set Channel 13 to Can control after setting multiple channels. You can then control the projector without changing the setting for Channel 13.

Channel/Function	Operation	Parameters	Description
1 Adjusting light (dimming)	0% to 100%	0 to 255	Adjusts the image brightness (default is 0)
2 Shutter control	Shutter closed Non-operational Shutter open	0 to 63 64 to 191 192 to 255	Closes and opens the shutter (default is 128)
3 Switch source	Non-operational	0 to 23, 32 to 55, 64 to 79, 88 to 127, 208 to 255	Switches to the specified source (default is 0)
	HDBaseT	24 to 31
	Computer	56 to 63
	LAN	80 to 87
	Slot 1-1*	128 to 135
	Slot 1-2*	136 to 143
	Slot 1-3*	144 to 151
	Slot 1-4*	152 to 159
	Slot 1-Quad*	160 to 167
	Slot 2-1*	168 to 175
	Slot 2-2*	176 to 183
	Slot 2-3*	184 to 191
	Slot 2-4*	192 to 199
	Slot 2-Quad*	200 to 207
4 Lens position	Non operational Move to home position	0 to 31, 64 to 255 32 to 63	Shifts the lens to the home position (default is 0)
5 Horizontal lens shift	(+) Lens adjustment	Movement - large: 0 to 31 Movement - medium: 32 to 63 Movement - small: 64 to 95	Shifts the lens horizontally by the amount of shift specified (default is 128)
	Non-operational	96 to 159
	(–) Lens adjustment	Movement - small: 160 to 191 Movement - medium: 192 to 223 Movement - large: 224 to 255
6 Vertical lens shift	(+) Lens adjustment	Movement - large: 0 to 31 Movement - medium: 32 to 63 Movement - small: 64 to 95	Shifts the lens vertically by the amount of shift specified (default is 128)
	Non-operational	96 to 159
	(–) Lens adjustment	Movement - small: 160 to 191 Movement - medium: 192 to 223 Movement - large: 224 to 255
7 Electronic zoom	(+) Lens adjustment	Movement - large: 0 to 31 Movement - medium: 32 to 63 Movement - small: 64 to 95	Zooms using the specified amount of movement (default is 128)
	Non-operational	96 to 159
	(–) Lens adjustment	Movement - small: 160 to 191 Movement - medium: 192 to 223 Movement - large: 224 to 255
8 Electronic focus	(+) Lens adjustment	Movement - large: 0 to 31 Movement - medium: 32 to 63 Movement - small: 64 to 95	Performs electronic focus using the specified amount of movement (default is 128)
	Non-operational	96 to 159
	(–) Lens adjustment	Movement - small: 160 to 191 Movement - medium: 192 to 223 Movement - large: 224 to 255
9 Electronic distortion	(+) Lens adjustment	Movement - large: 0 to 31 Movement - medium: 32 to 63 Movement - small: 64 to 95	Corrects distortion using the specified amount of movement (default is 128)
	Non-operational	96 to 159
	(–) Lens adjustment	Movement - small: 160 to 191 Movement - medium: 192 to 223 Movement - large: 224 to 255
10 Load lens memory	Non-operational	0 to 15, 176 to 255	Loads the specified lens memory (default is 0)
	Load lens memory 1	16 to 31
	Load lens memory 2	32 to 47
	Load lens memory 3	48 to 63
	Load lens memory 4	64 to 79
	Load lens memory 5	80 to 95
	Load lens memory 6	96 to 111
	Load lens memory 7	112 to 127
	Load lens memory 8	128 to 143
	Load lens memory 9	144 to 159
	Load lens memory 10	160 to 175
11 Power control	Power off Non-operational Power on	0 to 63 64 to 191 192 to 255	Turns the projector power on or off (default is 128)
12 Geometry correction	Off	0 to 15	Performs geometry correction (default is 255)
	H/V-Keystone	16 to 31
	Quick Corner	32 to 47
	Point Correction	48 to 63
	Curved Surface	64 to 79
	Corner Wall	80 to 95
	Load geometry correction memory 1	96 to 111	Loads a geometry correction memory (default is 255)
	Load geometry correction memory 2	112 to 127
	Load geometry correction memory 3	128 to 143
	Non-operational	144 to 175
13 Lock	Cannot control Can control	0 to 127 128 to 255	Enables/disables Art-Net operations (default is 0)
14 Freeze	Non-operational	0 to 31, 96 to 159, 224 to 255	Pauses or resumes image display (default is 128)
	Freeze off	32 to 95
	Freeze on	160 to 223

* The slot number of the interface board followed by the port number from left to right on the interface board