Wireless LAN Menu Settings

Setting Options Description
Connection Mode Quick

Advanced

Selects the type of wireless connection:

Quick: lets you connect to multiple smartphones, tablets, or computers directly

Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point

Search Access Point To Search View Search for available wireless network access points in Advanced connection mode
SSID Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is connecting to
Security Open

WPA2-PSK

WPA/WPA2-PSK

WPA2-EAP

WPA/WPA2-EAP

Selects the type of wireless security used in the wireless network (some options are only available when the Connection Mode setting is set to Advanced)
Passphrase Between 8 to 63 alphanumeric characters Enter a paraphrase for the wireless network
EAP Method EAP Type

User name

Password

Client Certificate

Verify Server Cert.

CA certificate

RADIUS Serv.Name

Sets the EAP settings for WPA2-EAP and WPA/WPA2-EAP security
Channel 1ch

6ch

11ch

In Quick connection mode, selects the frequency band (channel) used by the wireless LAN
IP Settings DHCP

IP Address

Subnet Mask

Gateway Address

Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address (some options are only available when the Connection Mode setting is set to Advanced)
SSID Display On

Off

Selects whether to display the SSID on the network standby screen
IP Address Display On

Off

Selects whether to display the IP address on the network standby screen
IPv6 Settings IPv6

Auto Configuration

Use Temporary Address

Selects the IPv6 settings when you connect the projector to the network using IPv6
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use