You can set
up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
Press the Menu
Select the Network menu
and press Enter.
Configuration and press Enter.
Select the Notifications
menu and press Enter.
Turn on Mail
Enter the IP address for the SMTP Server setting.
Note: Do not
use these addresses: 127.x.x.x or 188.8.131.52 through 255.255.255.255
(where x is a number from 0 to 255).
Select a number for the SMTP server Port Number setting, from 1 to 65535 (default
Enter the sender's email
address as the From
Choose an Address
Setting field, enter the e-mail address, and select or
deselect the alerts you want to receive there. Your e-mail address
can be up to 32 alphanumeric characters long. Repeat for up to
When you finish selecting settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
Note: If a
critical problem causes a projector to shut down, you may not
receive an e-mail alert.