Before you can project from computers on your network, you
must select the network settings for the projector using its menu
sure you already connected the projector to your wired network
using the LAN port.
Turn on the projector.
Press the Menu
Select the Network menu
and press Enter.
Configuration and press Enter.
Select the Basic menu
and press Enter.
Select the following basic options as necessary:
Projector Name lets you enter a name up to 16
alphanumeric characters long to identify the projector over the
PJLink Password lets you enter a password up
to 32 alphanumeric characters long for using the PJLink protocol
for projector control.
Remote Password lets you enter a password up
to 8 alphanumeric characters long for accessing the Remote screen
in Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.)
Web Control Password lets you enter a
password up to 8 alphanumeric characters long for accessing Epson
Web Control. (Default user name is EPSONWEB; default password is admin.)
Password lets you enter a password up to 4 numbers long for
accessing the projector as a moderator with the Epson iProjection
(Windows/Mac) software or the Epson iProjection app.
Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. The
projector displays a random keyword that you must enter from a
computer using the Epson iProjection (Windows/Mac) software or an
iOS or Android device, or on a Chromebook,
using the Epson iProjection app.
Keyword lets you display a keyword on the projected image
when accessing the projector from a computer using the Epson
iProjection (Windows/Mac) software or an iOS or Android
device, or on a Chromebook, using the Epson
Display LAN Info lets you select how the
projector displays network information. You can select an option to
display a QR code that lets you quickly connect your iOS or Android
devices using the Epson iProjection app.
Note: Use the
displayed keyboard to enter the name, passwords, and keyword. Press
the arrow buttons on the remote control to highlight characters and
press Enter to select
Select the Wired LAN
menu and press Enter.
Select your IP Settings as necessary:
network assigns addresses automatically, turn on the DHCP setting.
If you must
set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address
highlight the numbers you want from the displayed keyboard, press
the arrow buttons on the remote control. To select a highlighted
number, press Enter.
To prevent display of the IP address on the standby
screen, turn off IP Address
To connect the projector
to the network using IPv6, select On as the IPv6
Settings option. Then select the Auto Configuration and Use Temporary Address settings as
When you finish selecting settings, select Complete and follow
the on-screen instructions to save your settings and exit the