Basic Settings
| Setting | Options | Description | ||
|---|---|---|---|---|
| Copies | 1 to 99 | Specifies the number of copies to print | ||
| Color Mode | Black/White
Color |
Selects the color mode to use when printing | ||
| Quality | Speed
Fine Super Fine Draft |
Selects the print quality | ||
| Density | -4 to 4 | Choose the print density for the printed output. Positive values increase the density. | ||
| Paper Source | Roll Paper
Cut Sheet (1 sheet) |
Selects the paper source | ||
| Reduce/Enlarge | ||||
| Auto Fit Page | On
Off |
Select On to fit
the short edge of the image to the width of the paper
Note: This setting
is not available if paper is not loaded into the
printer. |
||
| Custom Size | Various settings | Select Actual Size to print using the image size or select a different output size | ||
| Page Margins option | Clip by Margins | Adds the value selected for the page margin inside the size selected for the base output size | ||
| Oversize | Adds the value selected for the page margin outside the size selected for the base output size (when set to a standard size) | |||
| Borderless | Enlarges the print size slightly to print a borderless image on roll paper | |||
Advanced Settings
| Setting | Options | Description | ||
|---|---|---|---|---|
| Original Type | Text & Image
Tracing Paper Recycled Blueprint Blueprint Inverted Watercolor Rendering |
Selects the type that corresponds to the loaded original | ||
| Original Size | Auto Detect
ISO A US-ANSI US-ARCH JIS-B ISO B User-Defined |
Determines the size of the scanned original. In most cases, Auto Detect should be used. Tracing paper and the optional carrier sheet are not detected automatically. | ||
| Top Offset | 0.0 to 3.94 inches
0.0 to 100.0 mm |
Selects the amount of area at the top of the scanned original that will not be scanned. If you are using the optional carrier sheet, the value should be 19 mm. | ||
| Image Quality | Contrast | Adjusts the contrast of the image | ||
| Sharpness | Adjusts the sharpness of the image | |||
| Remove Background | Removes backgrounds from thin originals or images with unwanted backgrounds | |||
| Bidirectional | On
Off |
Select On to print in both directions, resulting in faster print speed but reduced accuracy |
||
| Color Mode | EPSON Standard (sRGB) | Optimizes the sRGB space and corrects the color | ||
| Business Graphics | Performs color correction to optimize your images based on the sRGB space | |||
| GIS | Performs color correction when printing topographical maps | |||
| Line Drawing | Perform color correction when printing CAD drawings and other line drawings | |||
| Off (No Color Management) | Turns off color management in the printer | |||