You
can view 3D images using your projector. Viewing 3D images requires
a 3D-compatible video device, a compatible HDMI cable, and a pair
of Epson RF 3D glasses.
You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).
Note: Make
sure the 3D Display setting on
the Signal menu is set to
Auto or 3D.
-
Connect a 3D-compatible video device to the
projector using a compatible HDMI cable.
Note: You can also connect a 3D HDMI source to the WirelessHD Transmitter (Home Cinema 5050UBe).
- Turn on the video device, then turn on the projector.
-
Begin playback from the video device.
Note: Make sure you set the video device to play content in 3D mode.
- Slide the power switch on the 3D glasses to the On position.
-
Put on the 3D glasses and view the projected
image. If you do not see a 3D image, pair the glasses with the
projector.
Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.Note: Make sure you are within 32 ft (10 m) of the projector when using the 3D glasses or you may lose your connection.
