You can display information about the projector and
input sources by viewing the Info menu. However, you cannot change
any settings in the menu.
Note: To view
the firmware version of the projector or other components, select
Version.
Note:
Available settings depend on the current input source. The lamp
usage timer does not register any hours until you have used the
lamp for at least 10 hours.
Projector Info information
| Information item | Description |
|---|---|
| Lamp Hours | Displays the number of hours (H) the lamp has been used |
| Source | Displays the name of the port to which the current input source is connected |
| Input Signal | Displays the input signal setting of the current input source |
| Resolution | Displays the resolution of the current input source |
| Scan Mode | Displays the scan mode of the current input source |
| Refresh Rate | Displays the refresh rate of the current input source |
| 3D Format | Displays the format of the 3D signal |
| Sync Info | Displays information that may be needed by a service technician |
| Color Depth | Displays the color depth and color difference |
| Color Format | Displays information about the color space and dynamic range |
| Status | Displays information about projector problems that may be needed by a service technician |
| Serial Number | Displays the projector's serial number |
| Event ID | Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes |