If you are
using a compatible network control system, you can select settings
that allow your projector to be detected by those systems.
Press the Menu
button.
Select the Network menu
and press Enter.
Select Network
Configuration and press Enter.
Select the Others menu
and press Enter.
If you want to use the
notification function of PJLink, turn on the PJLink Notification setting and enter the IP
address of the notification recipient in the Notified IP Address setting.
If your network environment uses an AMX controller, turn
on the AMX Device Discovery
setting to allow the projector to be detected.
If your network environment uses a Control4 or Control4
SDDP controller, turn on the Control4
SDDP setting to allow the projector to be
detected.
When you finish selecting settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.