Loading Plastic and Laminated Cards in the
Input Tray
You can
load plastic and laminated cards that meet the card specifications
in the input tray.
Pull out
the output tray and open the stopper. Do not pull out the
extensions.
Slide
the input tray edge guides all the way out.
Load
plastic or laminated cards (printed side down and long edge first)
into the input tray horizontally, and slide them in until they meet
resistance.
Note: Do not load
plastic cards vertically.
Slide
the edge guides against the edges of the card.
Turn off the Detect Double Feed setting on the Main Settings
tab in Epson Scan 2 when scanning the cards.
Note: If you do
not disable the Detect Double Feed
setting and a double feed error occurs, remove the plastic or
laminated card from the input tray and reload it. Press the down
arrow button on the control panel, and select DFDS Function > On to disable the Detect
Double Feed setting for the next scan. The DFDS Function
setting only disables the Detect Double
Feed setting for one scan.