Scanning Two Originals onto One Sheet (Stitching Images) - Windows

You can scan both sides of a double-sided or folded original and combine them into a single image with the Epson Scan 2 Stitch Images settings (not available for all products).
Note: The settings may vary, depending on the software version you are using. See the help information in Document Capture Pro for details.
  1. Load your original in the product.
    Note: When scanning a folded original, you must use the optional carrier sheet or damage to the original may occur. Load the document into the carrier sheet with the folded edge against the right side of the carrier sheet. Make sure to insert the carrier sheet into the scanner with the white edge facing down.
  2. Do one of the following to start Document Capture Pro:
    • Windows 10: Click and select Epson Software > Document Capture Pro.
    • Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
    • Windows (other versions): Click or Start and select All Programs or Programs. Select Epson Software > Document Capture Pro.
  3. If you see a Switch to Simple View button in the upper right corner of the window, click it. You see a window like this:

  4. Click the Scan Settings button, then click Detailed Settings.
    Note: If you do not see any icons, click the V symbol next to the Job Settings button.
    You see an Epson Scan 2 window like this:

  5. Select Double-Sided as the Scanning Side setting.
  6. Select the original document size or Auto Detect as the Document Size setting.
  7. Select one of the following as the Stitch Images setting:
    • Top&Bottom: Places the scanned images one above the other.
    • Left&Right: Places the scanned images side by side.
  8. Select the Advanced Settings tab and set the Edge Fill setting to None.
  9. Click Save.
  10. Click OK.
  11. Click Scan. The scanned image is displayed.
    Note: If the scanned images are not stitched together in the correct orientation, click Scanning Side on the Epson Scan 2 window, select Settings, set the Binding Edge to Left or Top, and rescan the document.
Related references
User Replaceable Epson Scanner Parts