Cleaning Your Product

To keep your product working at its best, you should clean it several times a year.

Close the output tray and front cover when you are not using the product to protect it from dust.

Caution:
Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it.
  1. Turn off the product.
  2. Unplug the power cable.
  3. Disconnect any connected cables.
  4. Remove all the paper.
  5. Clean the scanner glass with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner.
    Caution:
    Do not spray glass cleaner directly on the glass and do not press the glass surface with any force.
  6. Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use